Blister Sealing Machine
A packaging machine for sealing thermoformed blisters to printed cards with controlled heat, pressure and dwell.

What this BENK configuration is designed to solve
Blister sealing quality depends on the coating, card stock, blister material and sealing tool. A machine that works for one pack may produce weak or visible seals on another. BENK reviews the full material stack and pack format, then configures the sealing area, temperature control and pressure system around it.
Where it fits in production
Suitable for retail, hardware, medical and consumer products that require a clean sealed card-to-blister pack.
Key system features
Controlled sealing parameters
Temperature, pressure and dwell can be set for the material stack and pack design.
Pack-specific tooling
The sealing plate and locating fixture are made for the card and blister layout.
Consistent presentation
Guides and fixtures help align the blister and card before pressure is applied.
Manual or automatic options
The scope can range from a compact manual cell to an integrated automatic packaging line.
Typical applications
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Typical role | Blister-to-card sealing |
| Pack format | Custom plate and fixture |
| Blister material | PVC, PET or other approved material |
| Card | Coated or uncoated board confirmed by sample |
| Seal method | Heat and pressure with project-specific dwell |
| Quality check | Peel strength and seal appearance agreed with the customer |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Manual or pneumatic press
- Automatic card feeder
- Scrap collection
- Temperature controller with recipe
- Downstream folding machine
From process review to factory trial
Practical questions before requesting a quotation
Can the machine seal PET blisters?
It can be reviewed, but the card coating and sealing method must be compatible with PET. A sample trial is recommended.
How is seal strength checked?
The customer and BENK should agree a peel or visual acceptance method based on the finished pack requirement.
Can the machine handle several pack sizes?
Multiple formats may be possible with interchangeable tooling and recipes, subject to changeover and alignment requirements.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
