Perforated Flexible Irrigation Band
A punched flexible band used for close row irrigation, nurseries and short runs where a simple outlet pattern is enough.
RAL 5021 · semi-matt finishProduct introduction
How the Perforated Flexible Irrigation Band is engineered, and which sub-assemblies protect the performance your customers actually buy.
A perforated flexible band is the simplest form of row irrigation: a flat PE band with a defined pattern of punched outlets that delivers water directly along the row. It is inexpensive, light and quick to lay.
BENK MACHINE produces the band in the outlet pattern that matches your row spacing and crop, so the water lands where the roots are. The band is made from UV stabilised polyethylene and is supplied in coils for direct field laying.
Product images and technical drawings
Equipment photographs and engineering illustrations of the product construction.
Technical parameters
Reference values for the standard configuration. Final dimensions, speed and output are confirmed against your material, product drawing and target capacity.
| Item | Specification |
|---|---|
| Product type | Perforated flexible irrigation band |
| Material | UV stabilised polyethylene |
| Outlet pattern | Punched to your row and plant spacing |
| Band width | Made to order |
| Supply form | Coils with length counting |
| Application | Close row crops, nurseries, short laterals |
Need a configuration outside this table? Send us your product drawing, resin and target output and BENK MACHINE will return a sized proposal with a budgetary price.
Technical advantages
Every sub-assembly below is selected to protect the performance your customers buy.
Matched outlet pattern
The punched pattern is set to the crop row spacing, so water is placed accurately without extra emitters.
Low cost per metre
A plain band with punched outlets is the least expensive way to irrigate a close row crop.
Light and quick to lay
The band unrolls flat and can be laid by hand or with a simple implement.
UV stabilised
The compound resists sunlight and lasts through the crop cycle in outdoor use.
Made to order
Width, thickness and outlet pattern are produced to your specification.
Consistent supply
Band is produced to a controlled thickness so that flow along the row stays even.
Key benefits
- Matched outlet pattern — The punched pattern is set to the crop row spacing, so water is placed accurately without extra emitters.
- Low cost per metre — A plain band with punched outlets is the least expensive way to irrigate a close row crop.
- Light and quick to lay — The band unrolls flat and can be laid by hand or with a simple implement.
- UV stabilised — The compound resists sunlight and lasts through the crop cycle in outdoor use.
Built to run
Material preparation, processing and downstream handling can be integrated into one turnkey scope from a single supplier.
Process flow
Each station is matched in capacity so the machine runs at the rated output without a bottleneck.
- Resin dosing
- Extrusion
- Band forming and sizing
- Cooling
- Haul-off
- Outlet punching in the required pattern
- Length counting
- Coil winding
Applications
Typical end uses for this product, based on the applications BENK MACHINE equipment already serves worldwide.
Nurseries and seedlings
Fine outlet patterns for seedbeds and propagation areas.
Close row vegetables
Leafy crops and herbs planted at narrow spacing.
Short laterals
Small blocks where a simple punched band is sufficient.
Landscape and garden
Borders, hedges and planting beds.
Options and auxiliary equipment
Configure the machine for the market you sell into. Popular additions include:
- Fibre reinforcement unit
- Pre-punching and ultrasonic welding unit
- Automatic coil winder
- Online thickness gauge
- Printing and marking unit
- Extended cooling tank
Why buy from BENK MACHINE
Extrusion specialists, not traders
BENK MACHINE designs and builds extrusion and drip irrigation equipment in Zhangjiagang with an in-house R and D and process team, so machine selection is matched to your resin and product instead of a catalogue number.
Evidence before shipment
Every machine is assembled and run in our works. You receive trial video, gauge and output records, and are welcome to attend the factory acceptance test.
Total cost, not lowest price
Energy efficient drives, permanent magnet motors and optimised heating reduce kWh per tonne, which usually matters more over five years than the initial purchase price.
Real commissioning support
Our engineers install, commission, train your operators and stay involved until the machine hits the specified output and quality on your material.
Spares and response
Critical spares are stocked for fast dispatch, and the Siemens Ethernet control platform allows remote diagnosis before a service visit is needed.
Upgrades as you grow
Co-extrusion, gauge control, automation and downstream equipment can be added later, protecting your original investment.
Frequently asked questions
The questions buyers ask most often about the Perforated Flexible Irrigation Band.
Can the outlet pattern be customised?
What material is used?
How is the band supplied?
Get a quotation for the Perforated Flexible Irrigation Band
Tell us the product specification, target output and the country the machine will be installed in. We will reply with a sized configuration, a budgetary price and an indicative delivery time.
- Telephone
- +86 512 5896 1463
- Mobile / WhatsApp / WeChat
- +86 159 5096 2426
- kpm@benkpm.com
- Address
- No.20 Huatang Road, Economic Development Zone (South District), Zhangjiagang City, Jiangsu Province, China
Related products
BENK MACHINE · www.benkpm.com · Extrusion and drip irrigation equipment.