BENK-5000S Single-Head Rotary-Table High-Frequency Machine
A rotary-table RF welder that allows loading and unloading at one position while welding occurs at another.

What this BENK configuration is designed to solve
The BENK-5000S uses a rotary table to separate operator loading from the welding position. This can improve rhythm on repeat parts without requiring a fully automated line. BENK reviews the table layout, electrode, fixture and safety envelope to ensure the operator can position the part consistently.
Where it fits in production
A useful middle step between a basic manual press and a custom automated high-frequency welding system.
Key system features
Rotary worktable
Operators can prepare the next part while another position is in the weld cycle.
Single welding head
One RF head is paired with a rotating table for a clear, repeatable process.
Part-specific fixture
The table can carry locating fixtures for consistent material alignment.
Operator-centered layout
Loading and unloading positions are arranged to reduce unnecessary movement.
Typical applications
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Model reference | BENK-5000S |
| Head configuration | Single-head |
| Worktable | Rotary table |
| Typical use | Manual or semi-automatic repeat RF welding |
| Tooling | Custom electrode and rotating fixture |
| Safety | Rotating-table guarding and cycle interlocks reviewed by project |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Two-station or multi-station table layout
- Custom fixture
- Weld monitoring
- Automatic ejection review
- Production counter
From process review to factory trial
Practical questions before requesting a quotation
Can the rotary table hold multiple fixtures?
It can be reviewed for multiple stations, subject to table size, head reach and safety requirements.
Does the rotary table automate loading?
No. It improves workflow by moving fixtures between positions; manual loading is still normally required unless additional automation is specified.
Can BENK match an existing electrode?
An existing electrode can be assessed, but its condition, insulation and compatibility with the machine must be checked.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
