Thermoforming · BENK-SP-850L

BENK-SP-850L Automatic Negative Pressure Three-Station Forming Machine

A three-station vacuum forming machine using upper and lower infrared heating for repeat production of trays, liners and technical plastic parts.

Project-specific configurationMaterial and tooling reviewFactory trial planning
BENK-SP-850L Three-Station Forming Machine product photograph by BENK Machinery
Product photograph. Final model, configuration and options are confirmed by project.
Product overview

What this BENK configuration is designed to solve

The BENK-SP-850L is an automatic negative-pressure three-station forming machine. Its heating arrangement is designed to soften sheet without letting the material fully sag before transfer to the forming station. BENK defines the sheet format, clamp frame, vacuum circuit, cooling method and take-off around the actual product.

Configuration noteNegative-pressure forming is a direct route for many tray, liner and cover products where reliable vacuum and controlled cooling provide the required shape.

Where it fits in production

Useful for manufacturers who want automatic repeatability without the added complexity of a pressure-forming system.

Key system features

Upper and lower infrared heating

The heater arrangement helps establish a consistent sheet temperature before forming.

Three-station automatic cycle

Loading, heating, forming and discharge steps are organized for repeat production.

Negative-pressure forming

A mold-specific vacuum circuit draws the heated sheet onto the tool.

Sheet transfer control

The sheet is moved to the forming station before excessive sag compromises the part.

Typical applications

Industrial traysAppliance linersPackaging basesMachine coversAutomotive interior components

Materials and process compatibility

ABSHIPSPPPETPVCPC on review
Technical planning

Specifications to confirm before the machine is frozen

Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.

Planning itemBENK review guidance
Model referenceBENK-SP-850L
HeatingUpper and lower infrared heater system
Forming methodNegative pressure/vacuum forming
StationsThree-station automatic sequence
ToolingCustom mold and vacuum-port design
UtilitiesAir, cooling and voltage confirmed with the plant layout
Please do not treat this page as a final data sheet. Request the approved project specification before placing an order or designing factory utilities.
Available scope

Configuration options to discuss with BENK

Options are selected only where they support the product, tool and production workflow.

  • Automatic sheet feed
  • Stacking or conveyor take-off
  • Mold cooling circuit
  • Job recipes
  • Guarding and interlocks
Project workflow

From process review to factory trial

01Application reviewProduct, material, output and constraints.
02Scope definitionMachine, tooling, utilities and interfaces.
03Build and integrationMechanical, electrical and control assembly.
04Trial runAgreed samples, checks and acceptance records.
05Delivery supportPacking, installation and training by scope.
Frequently asked questions

Practical questions before requesting a quotation

Does negative pressure mean the machine cannot use pressure assist?

The catalog identifies this model as a negative-pressure forming machine. Any added pressure function must be confirmed in the approved technical specification.

Can the machine form thick sheet?

It can be reviewed for suitable parts, but heater power, clamping and vacuum capacity must match the sheet gauge and draw depth.

What should be supplied for a quotation?

Part drawing, material, sheet size, thickness, cavity count, target output, voltage and plant utilities.

Technical review request

Specify the part before you specify the machine

Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.

Contact BENK
Chat with usWhatsApp