PVC Marble Sheet Production Line
A complete PVC marble sheet line producing 2-5 mm decorative wall panels with marbled surface, UV coating and optional PVC foam base.
RAL 5021 · semi-matt finish
Production line introduction
How the PVC Marble Sheet Production Line is engineered, and which sub-assemblies protect the properties your customers actually buy.
A complete PVC marble sheet line producing 2-5 mm decorative wall panels with marbled surface, UV coating and optional PVC foam base.
Every BENK line is matched to the material and product you actually sell. The extruder, die, calibration or forming section and the downstream automation are sized together, then assembled and trial run in our Zhangjiagang works before shipment, so the performance you see in the factory acceptance test is the performance you install. The machine frame is finished in RAL 5021 water blue with a semi-matt powder coating.
Technical Parameters of PVC Marble Sheet Production Line
Reference values for the standard configuration. Final width, thickness, speed and output are confirmed against your material, product drawing and target capacity.
| Item | Specification |
|---|---|
| Material | PVC + CaCO3 compound |
| Sheet width | 1220 mm (up to 1600 mm) |
| Thickness | 2 – 5 mm |
| Output | 400 – 1200 kg/h |
| Surface | Printed decor film + UV coating |
| Base | Solid or foamed PVC |
Need a model outside this table? Send us your sheet size, resin and target output — BENK will return a sized configuration with a budgetary price.
Production line technical advantages
Every sub-assembly below is selected to protect the properties your customers buy: transparency, gauge, strength and surface.
Dedicated die and calibration
The die and calibration tooling are designed around the board structure and thickness you sell, so the cell walls or foam skin close correctly.
Precision thickness control
Calender or calibration rolls with gauge feedback hold thickness across the full board width.
Hollow or foamed structure control
Vacuum calibration and temperature control keep the cell structure and density uniform.
Automatic downstream
Edge trimming, servo cutting and stacking deliver a finished board ready for packing.
Recycled material capability
The screw geometry accepts a controlled proportion of recycled material and filler.
RAL 5021 finish
The machine frame is powder coated in RAL 5021 water blue with a semi-matt finish.
Production line advantages
- Dedicated die and calibration — The die and calibration tooling are designed around the board structure and thickness you sell, so the cell walls or foam skin close correctly.
- Precision thickness control — Calender or calibration rolls with gauge feedback hold thickness across the full board width.
- Hollow or foamed structure control — Vacuum calibration and temperature control keep the cell structure and density uniform.
- Automatic downstream — Edge trimming, servo cutting and stacking deliver a finished board ready for packing.
Built to run
Material preparation, feeding, downstream handling and packing can be integrated into one turnkey scope.
Process flow
From raw material to finished pack, each station is matched in capacity so the line runs at the rated output without a bottleneck.
- Material mixing & dosing
- Extrusion & filtration
- Sheet / board die
- Calibration or calendering
- Cooling
- Trimming
- Cutting
- Stacking
Wide applicability
Typical end uses for the material this line produces, based on the applications BENK equipment already serves worldwide.
Construction and formwork
Reusable formwork and construction boards replacing wood and steel.
Packaging and logistics
Reusable packaging, turnover boxes and protective boards.
Decoration and advertising
Decorative and advertising boards for interior and display use.
Options and auxiliary equipment
Configure the line for the market you sell into. Popular additions include:
- Automatic gravimetric dosing
- Co-extrusion for surface layer
- Online thickness gauge with closed loop control
- Edge trim granulator and recycling
- Automatic stacking and packing
- Embossing or surface finishing unit
Why buy from BENK Machinery
Extrusion specialists, not traders
BENK designs and builds extrusion lines in Zhangjiagang with an in-house R&D and process team, so machine selection is matched to your resin and product instead of a catalogue number.
Evidence before shipment
Every line is assembled and run in our works. You receive trial video, gauge and output records, and are welcome to attend the factory acceptance test.
Total cost, not lowest price
Energy-efficient drives, permanent magnet motors and optimized heating reduce kWh per tonne, which usually matters more over five years than the initial purchase price.
Real commissioning support
Our engineers install, commission, train your operators and stay involved until the line hits the specified output and quality on your material.
Spares and response
Critical spares are stocked for fast dispatch, and the Siemens Ethernet control platform allows remote diagnosis before a service visit is needed.
Upgrades as you grow
Co-extrusion, gauge control, automation and downstream equipment can be added later, protecting your original investment.
Frequently asked questions
The questions buyers ask most often about this board.
What board sizes can the line produce?
Can recycled material be used?
How is thickness accuracy maintained?
What is included in the line?
Get a quotation for the PVC Marble Sheet Production Line
Tell us the material, sheet or film size, target output and the country the line will be installed in. We will reply with a sized configuration, a budgetary price and an indicative delivery time.
- Telephone
- +86 512 5896 1463
- Mobile / WhatsApp / WeChat
- +86 159 5096 2426
- kpm@benkpm.com
- Address
- No.20 Huatang Road, Economic Development Zone (South District), Zhangjiagang City, Jiangsu Province, China
Related extrusion lines
Zhangjiagang City BENK Machinery Co., Ltd. · www.benkpm.com · Plastic extrusion lines and extruders since 2004.