PVC Plastic Pipe Extrusion Line -four cavities

Your Premier Belling Machine in China

PVC four-cavity pipe production line for pipe production line extrusion molding. The PVC formula is fed quantitatively into the barrel by the feeding screw, transported, compressed, plasticized, and measured by the screw into the forming mold. A PVC four-cavity pipe production line can extrude four pipes into one machine at the same time. The PVC pipe extrusion line can save the investment cost of the plant and production, thus greatly increasing the production capacity and shortening the production time. It is produced with a cone twin 65 main engine, easily reaching 4-6T/24 hours. The production speed of a 16mm pipe can reach 8-10m/min.
Product advantage
1.The PVC pipe extrusion line integrates advanced technology from the biconical screw extruder to the downstream four-outlet stainless steel vacuum setting tank and spray cooling system. This innovative design can effectively reduce energy and material waste caused by adjusting the pipe production process. At the same time, it seamlessly combines four groups of traction units and cutting equipment with four outlet vacuum shaping and cooling systems to achieve self-realization. The mobile, independent, and flexible operation control reduces the defective rate and improves production efficiency. Ultimately, this allows users to increase their economic benefits by applying these new technologies.
Quantitative feeding device system, so that the extrusion amount and material supply accurately correspond to ensure the stable molding of products
2.Set the distribution gearbox, through which the drive torque is evenly distributed to each screw.
3.The heating is controlled by the solid-state relay (SSR), which is stable; (SSR) with No spark or noise to ensure safe production.