Single-Station Heavy-Gauge Blister Forming Machine
A focused forming cell for thick plastic sheet where draw depth, mold access and process control matter more than continuous packaging speed.

What this BENK configuration is designed to solve
Single-station heavy-gauge forming gives the mold and heating cycle room to be developed around the part. It is often a better fit for large enclosures, machine covers, automotive trim and low-to-medium volume industrial components than a high-speed packaging line. BENK reviews the sheet grade, preheat requirement, clamp frame, vacuum capacity and cooling method before selecting the configuration.
Where it fits in production
Best evaluated with a real part: thick sheet behaves differently from thin packaging film, and draw depth is closely tied to heating, sag control and vacuum capacity.
Key system features
Clamp frame matched to the sheet
The sheet carrier and sealing arrangement are designed around the blank size and required trim allowance.
Heavy-gauge heating strategy
Top and bottom heating can be reviewed to soften thick sheet evenly and reduce local overheating.
High-volume vacuum planning
Vacuum receivers, large-bore lines and venting are specified to support fast evacuation on deep parts.
Operator access for changeover
The station layout prioritizes safe mold access, part removal and setup checks for lower-volume product families.
Typische Anwendungen
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Typical role | Heavy-gauge and high-mix forming |
| Sheet gauge | Thick sheet; confirmed from material and part |
| Forming area | Custom platen and clamp-frame size |
| Heizung | Top and bottom infrared preheat options |
| Kühlung | Air, assisted cooling or mold-temperature method by product |
| Tooling | Single mold with vacuum ports and sealing designed for the part |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Pneumatic clamp frame
- Motorized sheet loading
- Top/bottom heater control
- Vacuum receiver and surge tank
- Part cooling fan or cooling fixture
From process review to factory trial
Practical questions before requesting a quotation
Can this machine form very large parts?
Large parts can be reviewed, but the practical size depends on sheet gauge, draw ratio, heater configuration and available vacuum. A drawing and sample are required.
Is single-station suitable for higher volume?
Yes for some heavy-gauge products. Cycle time and manual handling should be reviewed; a multi-station version may be better for repeat high output.
How is sag controlled?
Sag control combines heater zoning, sheet support, preheat strategy and transfer time. It should be proven with the actual material grade.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
