Thermoforming · Single Station

Single-Station Heavy-Gauge Blister Forming Machine

A focused forming cell for thick plastic sheet where draw depth, mold access and process control matter more than continuous packaging speed.

Project-specific configurationMaterial and tooling reviewFactory trial planning
Single-Station Heavy-Gauge Forming Machine product photograph by BENK Machinery
Product photograph. Final model, configuration and options are confirmed by project.
Product overview

What this BENK configuration is designed to solve

Single-station heavy-gauge forming gives the mold and heating cycle room to be developed around the part. It is often a better fit for large enclosures, machine covers, automotive trim and low-to-medium volume industrial components than a high-speed packaging line. BENK reviews the sheet grade, preheat requirement, clamp frame, vacuum capacity and cooling method before selecting the configuration.

Configuration noteThe machine can be planned for high-mix production where the operator needs access to the mold and the process recipe changes between heavy-gauge parts.

Where it fits in production

Best evaluated with a real part: thick sheet behaves differently from thin packaging film, and draw depth is closely tied to heating, sag control and vacuum capacity.

Key system features

Clamp frame matched to the sheet

The sheet carrier and sealing arrangement are designed around the blank size and required trim allowance.

Heavy-gauge heating strategy

Top and bottom heating can be reviewed to soften thick sheet evenly and reduce local overheating.

High-volume vacuum planning

Vacuum receivers, large-bore lines and venting are specified to support fast evacuation on deep parts.

Operator access for changeover

The station layout prioritizes safe mold access, part removal and setup checks for lower-volume product families.

Applicazioni tipiche

Machine covers and enclosuresAutomotive interior and exterior trimLarge industrial traysEquipment housingsProtective panels

Materials and process compatibility

ABSPCPEPPPSPMMA/acrylicPVC
Technical planning

Specifications to confirm before the machine is frozen

Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.

Planning itemBENK review guidance
Typical roleHeavy-gauge and high-mix forming
Sheet gaugeThick sheet; confirmed from material and part
Forming areaCustom platen and clamp-frame size
RiscaldamentoTop and bottom infrared preheat options
RaffreddamentoAir, assisted cooling or mold-temperature method by product
ToolingSingle mold with vacuum ports and sealing designed for the part
Please do not treat this page as a final data sheet. Request the approved project specification before placing an order or designing factory utilities.
Available scope

Configuration options to discuss with BENK

Options are selected only where they support the product, tool and production workflow.

  • Pneumatic clamp frame
  • Motorized sheet loading
  • Top/bottom heater control
  • Vacuum receiver and surge tank
  • Part cooling fan or cooling fixture
Project workflow

From process review to factory trial

01Application reviewProduct, material, output and constraints.
02Scope definitionMachine, tooling, utilities and interfaces.
03Build and integrationMechanical, electrical and control assembly.
04Trial runAgreed samples, checks and acceptance records.
05Delivery supportPacking, installation and training by scope.
Domande frequenti

Practical questions before requesting a quotation

Can this machine form very large parts?

Large parts can be reviewed, but the practical size depends on sheet gauge, draw ratio, heater configuration and available vacuum. A drawing and sample are required.

Is single-station suitable for higher volume?

Yes for some heavy-gauge products. Cycle time and manual handling should be reviewed; a multi-station version may be better for repeat high output.

How is sag controlled?

Sag control combines heater zoning, sheet support, preheat strategy and transfer time. It should be proven with the actual material grade.

Technical review request

Specify the part before you specify the machine

Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.

Contatto BENK
Parlare con noiWhatsApp