BENK-SPZ-600 Automatic Positive & Negative Pressure Three-Station Forming Machine
A three-station automatic former combining positive/negative pressure forming with dual infrared heating for detailed, repeatable plastic parts.

What this BENK configuration is designed to solve
The BENK-SPZ-600 uses a double upper and lower electric-furnace infrared heating system and moves the sheet through a three-station cycle. The configuration is intended for parts that need controlled heating and a pressure-assisted forming method rather than simple vacuum alone. BENK reviews the required forming area, mold, material and output before finalizing the machine details.
Where it fits in production
A strong candidate for technical parts with fine surface detail, deep draws or materials that benefit from pressure-assisted forming.
Key system features
Dual upper and lower heating
Both sheet faces can be heated through an infrared furnace arrangement for a more controlled thermal profile.
Positive and negative pressure forming
Pressure and vacuum can be combined to improve detail, wall distribution and mold contact.
Three-station sequence
Heating, forming and related handling steps are organized into a repeatable automatic cycle.
High-power vacuum assistance
A rotary-vane vacuum system supports rapid evacuation so the sheet follows the mold geometry closely.
Typical applications
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Model reference | BENK-SPZ-600 |
| Heating | Double upper and lower electric infrared furnace |
| Forming | Positive and negative pressure with vacuum assistance |
| Stations | Three-station automatic sequence |
| Work envelope | Confirmed against mold and sheet format |
| Controls | PLC-based sequence and temperature control as configured |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Mold clamping arrangement for the part
- Cooling optimization
- Автоматический взлет
- Recipe storage
- Safety guarding to project standard
From process review to factory trial
Practical questions before requesting a quotation
What is the BENK-SPZ-600 best used for?
It is suited to repeat technical parts that benefit from dual-side heating and pressure-assisted forming. The final match depends on the mold and material.
Can pressure and vacuum be adjusted separately?
The forming recipe should be engineered around the part. Available adjustment points and ranges must be confirmed in the approved machine specification.
Can BENK test the customer mold?
Factory trial support can be included by project. The mold condition, utilities and acceptance checks should be agreed before shipment.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
