BENK-SP-850L Automatic Negative Pressure Three-Station Forming Machine
A three-station vacuum forming machine using upper and lower infrared heating for repeat production of trays, liners and technical plastic parts.

What this BENK configuration is designed to solve
The BENK-SP-850L is an automatic negative-pressure three-station forming machine. Its heating arrangement is designed to soften sheet without letting the material fully sag before transfer to the forming station. BENK defines the sheet format, clamp frame, vacuum circuit, cooling method and take-off around the actual product.
Where it fits in production
Useful for manufacturers who want automatic repeatability without the added complexity of a pressure-forming system.
Key system features
Upper and lower infrared heating
The heater arrangement helps establish a consistent sheet temperature before forming.
Three-station automatic cycle
Loading, heating, forming and discharge steps are organized for repeat production.
Negative-pressure forming
A mold-specific vacuum circuit draws the heated sheet onto the tool.
Sheet transfer control
The sheet is moved to the forming station before excessive sag compromises the part.
برنامه های معمولی
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Model reference | BENK-SP-850L |
| گرمایش گرم | Upper and lower infrared heater system |
| روش تشکیل | Negative pressure/vacuum forming |
| ایستگاه ها | Three-station automatic sequence |
| Tooling | Custom mold and vacuum-port design |
| Utilities | Air, cooling and voltage confirmed with the plant layout |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Automatic sheet feed
- Stacking or conveyor take-off
- Mold cooling circuit
- Job recipes
- Guarding and interlocks
From process review to factory trial
Practical questions before requesting a quotation
Does negative pressure mean the machine cannot use pressure assist?
The catalog identifies this model as a negative-pressure forming machine. Any added pressure function must be confirmed in the approved technical specification.
Can the machine form thick sheet?
It can be reviewed for suitable parts, but heater power, clamping and vacuum capacity must match the sheet gauge and draw depth.
What should be supplied for a quotation?
Part drawing, material, sheet size, thickness, cavity count, target output, voltage and plant utilities.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
