Sealing · Blister Seal

Blister Sealing Machine

A packaging machine for sealing thermoformed blisters to printed cards with controlled heat, pressure and dwell.

Project-specific configurationMaterial and tooling reviewFactory trial planning
Blister Sealing Machine technical overview by BENK Machinery
Conceptual BENK product illustration. Replace with a licensed product photograph or approved render before publication.
Product overview

What this BENK configuration is designed to solve

Blister sealing quality depends on the coating, card stock, blister material and sealing tool. A machine that works for one pack may produce weak or visible seals on another. BENK reviews the full material stack and pack format, then configures the sealing area, temperature control and pressure system around it.

Configuration noteThis machine is evaluated with the blister, card and any coating or adhesive layer, not as a standalone heat press.

Where it fits in production

Suitable for retail, hardware, medical and consumer products that require a clean sealed card-to-blister pack.

Key system features

Controlled sealing parameters

Temperature, pressure and dwell can be set for the material stack and pack design.

Pack-specific tooling

The sealing plate and locating fixture are made for the card and blister layout.

Consistent presentation

Guides and fixtures help align the blister and card before pressure is applied.

Manual or automatic options

The scope can range from a compact manual cell to an integrated automatic packaging line.

برنامه های معمولی

Hardware blister packsConsumer electronics packagingMedical device packsToy and stationery packsReplacement-part kits

Materials and process compatibility

PVC blisterPET blisterCoated cardPaperboardSelected sealing coatings
Technical planning

Specifications to confirm before the machine is frozen

Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.

Planning itemBENK review guidance
Typical roleBlister-to-card sealing
Pack formatCustom plate and fixture
Blister materialPVC, PET or other approved material
CardCoated or uncoated board confirmed by sample
Seal methodHeat and pressure with project-specific dwell
Quality checkPeel strength and seal appearance agreed with the customer
Please do not treat this page as a final data sheet. Request the approved project specification before placing an order or designing factory utilities.
Available scope

Configuration options to discuss with BENK

Options are selected only where they support the product, tool and production workflow.

  • Manual or pneumatic press
  • Automatic card feeder
  • Scrap collection
  • Temperature controller with recipe
  • Downstream folding machine
Project workflow

From process review to factory trial

01Application reviewProduct, material, output and constraints.
02Scope definitionMachine, tooling, utilities and interfaces.
03Build and integrationMechanical, electrical and control assembly.
04Trial runAgreed samples, checks and acceptance records.
05Delivery supportPacking, installation and training by scope.
اغلب سوالات پرسیده می شود

Practical questions before requesting a quotation

Can the machine seal PET blisters?

It can be reviewed, but the card coating and sealing method must be compatible with PET. A sample trial is recommended.

How is seal strength checked?

The customer and BENK should agree a peel or visual acceptance method based on the finished pack requirement.

Can the machine handle several pack sizes?

Multiple formats may be possible with interchangeable tooling and recipes, subject to changeover and alignment requirements.

Technical review request

Specify the part before you specify the machine

Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.

تماس با BENK
چت با ماWhatsApp WhatsApp