BENK-4000T Double-Head Foot-Pedal High-Frequency Machine
A double-head foot-pedal RF welding machine for flexible production where direct operator control is preferred.

What this BENK configuration is designed to solve
The BENK-4000T is a double-headed, foot-pedal high-frequency machine for manual and semi-manual sealing work. It gives the operator direct control of each weld cycle while allowing the two heads to support a balanced workflow. BENK matches the electrode, fixture, power setting and safety arrangement to the product.
Where it fits in production
A straightforward RF welding platform for small and medium parts where flexibility and operator feel are more important than automated handling.
Key system features
Foot-pedal cycle control
The operator controls press actuation directly, which can suit varied or hand-positioned parts.
Double-head workstation
Two welding heads support alternating work and a more continuous manual routine.
Adjustable RF and dwell settings
Power and weld time can be tuned to the material and electrode pattern.
Tooling-focused setup
Electrodes and fixtures can be designed for repeat positioning and clean part removal.
Tipe aplikasi
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Model reference | BENK-4000T |
| Head configuration | Double-head |
| Press action | Foot pedal |
| Penggunaan khas | Manual or semi-manual repeat welding |
| Tooling | Product-specific electrode and fixture |
| Shop requirements | Stable power supply, grounding and compressed air if used |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Custom electrode
- Positioning fixture
- Weld counter
- Head spacing adjustment
- Upgraded guarding
From process review to factory trial
Practical questions before requesting a quotation
Is a foot-pedal machine suitable for high volume?
It can suit medium-volume production where parts need flexible positioning. For higher output, a pneumatic or automated system may be more consistent.
Can the machine emboss a logo?
Yes, the electrode can include a logo or texture when the material and required depth are reviewed.
What material information is needed?
Provide the material type, thickness, coating or laminate structure, part drawing and a sample if available.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
