Automatic Continuous Vacuum Blister Forming Machine
A continuous vacuum forming concept for repeat products that benefit from steady sheet movement and a disciplined heating-to-forming cycle.

What this BENK configuration is designed to solve
Continuous vacuum forming is used where the product family and material can be kept stable across a production run. The key engineering questions are sheet tension, heater response, mold vacuum and part release. BENK combines these into a line scope so the machine is not defined by heating power alone.
Where it fits in production
Consider continuous vacuum forming when repeatability and throughput matter, while the material and product format are sufficiently defined for a dedicated line.
Key system features
Continuous sheet indexing
Material movement is coordinated with heating and forming to create a repeatable cycle instead of variable manual loading.
Stable heater exposure
The heater bank and sheet speed are reviewed together so each part receives a comparable thermal history.
Vacuum circuit for the mold
Vent design, vacuum response and cooling are planned around cavity detail and draw depth.
Discharge integration
Take-off, stacking, trimming or packing equipment can be reviewed as part of the same line.
Tipe aplikasi
Materials and process compatibility
Specifications to confirm before the machine is frozen
Model names identify a catalog starting point. Final performance and dimensions must be tied to the approved material, tool and acceptance plan.
| Planning item | BENK review guidance |
|---|---|
| Typical role | Continuous repeat production |
| Product format | Fixed or limited product family recommended |
| Haating | Infrared heater bank with index-coordinated exposure |
| Vacuum | Mold-specific receiver and circuit |
| Memasak | Air, water-assisted or molded cooling by application |
| Downstream | Trim, stack or pack options defined with the line |
Configuration options to discuss with BENK
Options are selected only where they support the product, tool and production workflow.
- Servo-controlled indexing
- Automatic stacker
- Inline trim station
- Scrap rewind
- Production counters and alarms
From process review to factory trial
Practical questions before requesting a quotation
Can the line run multiple sheet widths?
It may be possible with adjustable guides and recipes, but the heater layout and vacuum zone must be checked for each format.
What determines line speed?
Material, sheet gauge, heater response, draw depth, cooling and downstream handling all affect stable line speed.
Is a trial run recommended?
Yes. A material sample and mold are the most reliable way to confirm cycle, appearance and dimensional performance.
Continue comparing BENK solutions
Use the related pages to compare process methods, feeding requirements and downstream options.
Specify the part before you specify the machine
Email the product drawing, material data, sample photos, target output and plant voltage to BENK. Include any existing mold or tooling information.
